Polyhedral Birdhouse Connectors – (3D Printer Ready – Digital Download – STL)

This is a digital download of the STL files needed to 3D print the internals to make your own Polyhedral Birdhouse.  Technically, this is a 34% morph dual in between a Hexagonal Antiprism and a Hexagonal Deltohedron.  I’ve also included the SVG, AI, and PDF file to use on a laser cutter to create the faces. The example pics above of an actual Polyhedral Birdhouse are for reference only.  This is an complex build.

Holes are sized for #6-32, and you will need 168 screws total. I used 3/8″, 6-32 screws in the example build.  The screws needed are not included, as this is a digital file. You will need a 3D printer, or access to one to print these connectors, as well as a laser cutter to cut the faces.

You will need to 3D print 38 connectors.

1 Birdhouse Hole
11 Middle Connectors
12 Roof and Floor Connectors
2 Apex Connectors

You will need to laser cut/print 60 faces.

12 four sided (Pointy with 2 holes)
12 Thin rectangles (2 Holes)
12 Rectangles (4 Holes)
12 Triangles (Middle, 3 Holes)
12 Triangles (Roof & Floor, 3 holes)

You will need a .25″ dowel for perch, as well as  rope to hang the birdhouse.  The roof and floor connector has a hole to feed the rope through.

Acceptable Usage:
– Commercial and personal use is allowed for making and selling a physical item
– You may not resell, redistribute, or share the digital files for in any way!

Absolutely no returns on digital download items.